F22b1 Turbo Quesitions
Thread Starter
Joined: Mar 2011
Posts: 5
F22b1 Turbo Quesitions
I going to turbo my f22b1. I have the turbo kit (not Ebay). I wanted to know what is needed to have it recognized by the ecu. Also if anyone could let me know anything else that might be needed that would be great also. Thanks Guys
Supper Moderator
Joined: Feb 2009
Posts: 3,894
From: Tallahassee, FL
you need a chipped ecu or a standalone set up. You stock ecu will kill yur engine if not tuned. Also your stock ecu is NOT tunable your best bet is a AEM stain alone run you about 600-1000 bucks.
Joined: May 2011
Posts: 3
You can just use an obd1 civic ecu like the p06. You can find them already chipped for ~100 dollars shipped. For there you can get some one to tune it for you. It is essentialy a standalone setup for alot cheaper than all other options.
Supper Moderator
Joined: Feb 2009
Posts: 3,894
From: Tallahassee, FL
If you don't go with a EMS you will need to get a 3 bar mad sensor and trick the ecu so you blow it up under boost pressure when you get it tuned. If you want a turbo engine...you NEED/want a EMS
Thread
Thread Starter
Forum
Replies
Last Post
