Suspension Talk about your suspension within.

How low can i go ???

Old Jul 27, 2007 | 10:02 AM
  #1  
ohsmustangs09's Avatar
Thread Starter
Joined: Oct 2006
Posts: 102
From:
Default How low can i go ???

I want to lower my accord, but i dont know how low i can lower it w/o having to replace my shocks...i have about 2.5" of fender gap and i would like to git ride of as most of that as i can....any info greatly appreciated, thanks!
 
Old Jul 27, 2007 | 11:36 AM
  #2  
smaglik's Avatar
Been Around A Long Time Member
Joined: Nov 2006
Posts: 2,631
Default RE: How low can i go ???

1" is about all you can do without replacin the shocks...though they will still likely wear faster.
 
Old Jul 27, 2007 | 11:45 AM
  #3  
finch13's Avatar
Been Around A Long Time Member
Joined: Jun 2007
Posts: 7,381
From: St. Paul, MN
Default RE: How low can i go ???

Yes, Eibach Pro-Kit was designed to be used with the stock shocks and will get rid of some, not all of the gap. IMO it looks the best since there is equal gap on the sides and top of the tire. Depending on how old your shocks are the ride will get bouncier, but will hold better in the corners. About $190 at tirerack.com, that's where I got them from and I looked at about 20 different sites and that was the cheapest.
 
Old Aug 1, 2007 | 08:57 AM
  #4  
ohsmustangs09's Avatar
Thread Starter
Joined: Oct 2006
Posts: 102
From:
Default RE: How low can i go ???

alright thanks i will look into the eibach pro-kit...yea i live 5 minutes down the rode from Summit and they are 260 there...ha...tirerack it is, thanks!
oh yea, what about a wheel alignment kit ? would i need anything like that ?
 
Old Aug 4, 2007 | 03:02 PM
  #5  
finch13's Avatar
Been Around A Long Time Member
Joined: Jun 2007
Posts: 7,381
From: St. Paul, MN
Default RE: How low can i go ???

I put my springs on a brought it in for a full alignment. They adjusted everything back to stock except the rear camber which is not adjustable without a camber kit. The camber is not severe enough to cause tire wear concern so you can go without it.
 
Old Aug 15, 2007 | 01:11 AM
  #6  
Super Eurobeat's Avatar
Joined: Aug 2007
Posts: 19
From:
Default RE: How low can i go ???

the amount of lowering you can get the car (safely) to do depends on many variables.
When you lower a car, all the geometry of the suspension changes, control arms come up and closer to parallel where the point of understeer becomes excessive, the amount the damper (shock absorber/strut cartridge) can be pushed before it bottoms out. For slamming the car you will need short bodies shocks to increase suspension travel, along with adjustable coilovers (like ground control) to stiffen the car up so it doesnt bottom out. If you have tire to fender clearance as little as my car then you will need to stiffen it up a lot and reinforce mounting points.
You will need to use spacers to put control arms back to their original angles if you decide to lower the car over 1.5 inches.


see my fender to tire clearance at static suspension:


 
Old Aug 16, 2007 | 04:29 AM
  #7  
steviebix's Avatar
Senior Member
Joined: Mar 2007
Posts: 194
From:
Default RE: How low can i go ???

how long do you think ill be able to go b4 i have to switch out my struts?....ive got tein S-tech springs and have had them for about 2000 miles...its a 1.75 inch drop. thanks
[align=left] [/align]
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CD7jay
Suspension
4
Oct 28, 2009 01:11 AM
ItsNewToMe
General Tech Help
1
May 3, 2009 07:20 AM
Nitin
General Tech Help
8
Apr 20, 2008 07:19 PM
HondaAccordNewb
General Tech Help
14
Oct 18, 2007 06:51 AM
thunder_x
Suspension
3
Sep 25, 2006 09:34 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:43 AM.