Need recomendations for DIY Alloy wheel refurb
#1
Need recomendations for DIY Alloy wheel refurb
My wife has a 1999 Accord EX with alloy wheels. The wheels are in tough shape from the salt and chemicals from to many hard winters. I have been watching videos on DIY wheel repair.
I am looking for recommendations on refinihing kits. No so much curb rash as just corrosion damage to the finish on the rims.
It looks like sanding and then rustoleum aluminum paint and clear coat my be one option. Any better choices?
I am looking for recommendations on refinihing kits. No so much curb rash as just corrosion damage to the finish on the rims.
It looks like sanding and then rustoleum aluminum paint and clear coat my be one option. Any better choices?
#3
If you want to sand and buff, you CAN do it, I have about an average hour and a half into each one and I am almost done.
stage 3 polish, before
stage 2
Paint stripper from Home Depot,
Light sanding
then soft scrub on a 6" buffer,
then polish with a buffer with Mothers Mag and AL polish.
stage 3 polish, before
stage 2
Paint stripper from Home Depot,
Light sanding
then soft scrub on a 6" buffer,
then polish with a buffer with Mothers Mag and AL polish.
Thread
Thread Starter
Forum
Replies
Last Post
Speed Demon
Tires & Wheels
0
08-09-2012 10:48 AM
markus9175
General Tech Help
2
03-27-2009 10:35 PM
hoonhooon
General Tech Help
5
01-07-2008 06:47 PM
djdaveq
General Tech Help
0
08-31-2007 11:10 PM