1991 fuel pressure test port
#11
Well, cleaning the connector didn't help things. If I want to pursue this I guess I could change the O2 sensor but it's only about 3 years old and <10,000 miles. Not sure I want to do anymore: ^(
Bob
Bob
#14
A side note: a lot of Bosch's products are being manufactured in 3rd world countries, so the quality might not be as good as it used to be. Just a heads up.
#15
A friend I know has a 96 Canadian Accord that was having a "no code" drive ability issue. Upon first description, I suggested a lazy O2 but he ruled that out as it was replaced a year before.
About six months later it finally threw a code for the O2 - he had put a Bosch unit in it the year before. Replaced it with a Denso the next time and has been driving it for about three years now without any engine issues - is having a DRL issue right now but that is another story.
About six months later it finally threw a code for the O2 - he had put a Bosch unit in it the year before. Replaced it with a Denso the next time and has been driving it for about three years now without any engine issues - is having a DRL issue right now but that is another story.
#16
Well Poorman212 you were correct:^) Today I got to change the O2 sensor Denso) and that solved the problem. I looked up my records and the old O2 sensor went in March 2013 about 7000 miles ago when I replaced the exhaust pipe. What mislead me was the manual description of the 43 error. Although it starts by suggesting the O2 sensor, it also says if accompanied by poor drivability it's the fuel system. So I hit the O2 sensor last when I should have hit it first. Anyway now I know the fuel system is OK, the ignition is refurbished and the O2 replaced. About $120 in parts because there isn't a standard adapter for the fuel port, had to kluge one together.
Thanks all,
Bob
Thanks all,
Bob
#17
Well Poorman212 you were correct:^) Today I got to change the O2 sensor Denso) and that solved the problem. So I hit the O2 sensor last when I should have hit it first. Anyway now I know the fuel system is OK, the ignition is refurbished and the O2 replaced. About $120 in parts because there isn't a standard adapter for the fuel port, had to kluge one together.
Thanks all,
Bob
Thanks all,
Bob
The fuel adapter is available thru " thepartstree.com ", as it's also used on Honda Marine engines. They're getting 15 to 20 bucks for it, but, you still have to modify it so you can use a conventional pressure gauge on it. That's what I had to do for my 97 Accord to test pressure.
In talking with an old Mercedees mechanic, he tells you to go thru the check list of problem solving first. But more importantly, don't think, just do it. Tht's because if YOU start thinking, you'll only create new problems to solve. The engineers were pretty damn smart for you to "out smart". I look at it that way when going thru the Honda FSM too.
Thread
Thread Starter
Forum
Replies
Last Post
BigOBob
General Tech Help
15
01-01-2012 02:47 PM
chandlers dad
General Tech Help
13
09-30-2007 01:32 PM