89 Honda Gasket repair
#1
Unregistered
Posts: n/a
89 Honda Gasket repair
I've recently blown my head gasket on my 89 Accord. I've done all the testing I can to ensure that it really is the gasket (compression test, wet and dry etc) and now Im getting ready to dive in. Im new to the whole repair thing but this car is a good project even if this fix is a little over my head. I have the Chilton book but everything is remove this or that. Some of the items I can figure out others (the brake boost lines?) are not so obvious to me. I was wondering if anyone knew of an exploded view engine diagram or of a forum post where a gasket had been replaced? Just looking for any help in identifying what the heck Im meant to be pulling out. Any help would be great!
#2
RE: 89 Honda Gasket repair
go here and get the service manual, make sure you have a torque wrench on hand
http://hondatech.info/downloads/Auto/Manuals/Accord/
http://hondatech.info/downloads/Auto/Manuals/Accord/
Thread
Thread Starter
Forum
Replies
Last Post
thunder_x
Engine & Internal
3
07-09-2007 11:57 AM