General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.
Sponsored by:
Sponsored by:

97 Accord LX 2.2 4 cyl

Thread Tools
 
Search this Thread
 
  #1  
Old 10-01-2009, 03:25 PM
cavsman's Avatar
Thread Starter
Join Date: Sep 2009
Posts: 6
Default 97 Accord LX 2.2 4 cyl

Need some help guys. Just pulled the spark plug boots out of valve cover and they are covered in oil. I assume a seal has failed. Thanks.
 
  #2  
Old 10-01-2009, 03:34 PM
PAhonda's Avatar
Super Moderator
Join Date: Sep 2006
Location: Houston, TX
Posts: 15,620
Default

There is a DIY writeup about that.

Get the valve cover gasket and the seals that go on top of each tube. Its a pretty simple replacement.
 
  #3  
Old 10-01-2009, 03:37 PM
mcnoople's Avatar
Member
Join Date: Jun 2009
Posts: 113
Default

sometimes it is also the seals at the bottom of the tube.

Spark plug tube seals and rocker stand seals
 
  #4  
Old 10-01-2009, 06:17 PM
deserthonda's Avatar
Been Around A Long Time Member
Join Date: Dec 2005
Location: In The Desert ( Sahara ? )
Posts: 4,754
Default

go to the DIY section there is a write up on it ..
 
  #5  
Old 10-01-2009, 06:56 PM
cavsman's Avatar
Thread Starter
Join Date: Sep 2009
Posts: 6
Default

Thanks guys. Looks like a full weekend with seal repairs, rear shoes and condenser fan on same car and front brake pads on my suburban.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mrmatrix
New Member Area
4
08-12-2006 05:39 PM
trip1980
Engine & Internal
9
07-14-2006 11:41 PM
tom77
General Tech Help
3
01-21-2006 08:56 AM
nman
General Tech Help
4
01-11-2006 11:52 AM
MI_CM_ACCORD
Headers, Intake, & Exhaust
5
09-27-2005 04:42 PM



Quick Reply: 97 Accord LX 2.2 4 cyl



All times are GMT -5. The time now is 01:48 AM.