I just bought a 95 accord ex/v6 2.7L, the abs motor is always running, until I pull the E-brake,,, I'm lost,, because the brake work fine

 

Are you getting any codes?

Have you check the brake fluid in the master cyl and the ABS unit?

 

Yes, I reversed bled it from the brake caliper up, but the abs motor runs constantly, until I pull the E-brake

95 Honda EX a/t V6

 

don't C any codes either..

95 Honda EX a/t V6

 

I would bleed the abs unit as well. In the "Common DIY Threads" sticky at the top of this section there is a "how to"...or here

https://www.hondaaccordforum.com/for...systems-31259/

While doing this, look for signs of leaks around the unit. There is an o-ring that fails sometimes.