connecting rods on door acruator on 2004
#1
Unregistered
Posts: n/a
connecting rods on door acruator on 2004
Hi,
I am putting back in my driver side door actuator (after a week) and I do not where one of the rods goes to. I have connected one rod to open the door from the outside, but I guess the other rod somehow affects the opening of the inside handle as the door won't open from the inside. The diagrams I have aren't that specific, so I was wondering where that rod connects to.
Thanks in advance for any help !!!
Ron.
I am putting back in my driver side door actuator (after a week) and I do not where one of the rods goes to. I have connected one rod to open the door from the outside, but I guess the other rod somehow affects the opening of the inside handle as the door won't open from the inside. The diagrams I have aren't that specific, so I was wondering where that rod connects to.
Thanks in advance for any help !!!
Ron.
#2
Welcome!
This is a new-member-introductions area, so I'm gonna move this question over to the General Tech forum.
Find parts drawings on places like hondaautomotiveparts dot com. Click PARTS catalog, then put in your car info. You didn't say 2-door vs. 4-door....
This is a new-member-introductions area, so I'm gonna move this question over to the General Tech forum.
Find parts drawings on places like hondaautomotiveparts dot com. Click PARTS catalog, then put in your car info. You didn't say 2-door vs. 4-door....
Thread
Thread Starter
Forum
Replies
Last Post
nvecsey
Nitrous, Super Chargers, & Turbos
9
05-30-2009 08:48 AM
nafango2
Engine & Internal
0
11-16-2007 08:52 PM