Hello! Need some help here for replacing the head gasket on my buddy's accord:
1996 Honda accord 2.2 litre motor, auto transmission...non-vtec.

Torque specs for its head bolts as well as for its intake and exhaust manifolds.
Also he'd like to know its valve clearances.

Any help will be appreciated! Thanks, Newbie here.

 

Go to the sticky post "Common DIY Threads", then click on "Online Shop Manuals."

 

Intake valve clearance .010mm............ Exhaust valve clearance .012mm
Intake nuts torque 16 ftlbs................ Exhaust nuts 23 ftlbs.
Head bolt torque; 1st pass 29ftlbs
2nd pass 51ftlbs
3rd pass 72.5 ftlbs