The diagram in the shop manual is pretty confusing on how the fuel hoses are routed. Did you also remove the banjo bolt to verify no fuel was coming out of the feed line?

Is it easy to switch the two lines with how you repaired them?

 

Hi PAhonda,

Will there be a major issue if I swap the lines and try to start the car? I think I’m at that point.

Thanks,

Trevor

 

I don't think you'll have a major issue if you swap the lines.

 

Hi PAonda,

No, I didn’t remove the other line. I guess I can.

however, if you don’t think that there may be an issue with swapping the lines to check, I thought I’d start there.

thanks again for all of your help!

Trevor

 

I did the fuel line switch and it started right up 🙂.

feel like a bonehead. Don’t know how in the world that even happened, as I removed the lines one at a time.

Thank you again for the help! I GREATLY appreciate it.

Trevor

 

No worries. I've made many bonehead mistakes during DIY work. I'm sure I'll have some more in the future.

Thanks for posting the results. Hopefully the swap was simple.