Hey everyone I just switch out my clutch now I can put it in gear I did everything correct n bleed the clutch n still won't go I gear stuck don't know what to do now so I need help

 

If slave cylinder is not moving, you have a hydraulic problem; bad master cylinder, clutch cylinder, or air in lines.

If slave cylinder moves full travel, you have a mechanical problem in the clutch housing (bad news!).

good luck

 

I agree with TexasHonda. Just so you know, you need 2 people to bleed the hydraulics. I did that last month on my 97 Accord, when I replaced both the clutch master and slave (master was just starting to leak into the car). It also allowed me to get a little more pedal height (engagement off the floor), as I was having an issue with that.