valve lash?
valve lash?
Super Moderator
Joined: May 2010
Posts: 11,834
From: Kenton, TN
Should be on the sticker under the hood.
COLD ENGINE - Intake is .12-.17 MM or .005- to .007 inch.....Exhaust .25 to .30 MM or .010 to .012 inch....double check my metric conversion
Be sure each is checked when each cyl is at TDC. I find it easier to remove the spark plugs, so there is no compression to fight. Again....cold cyl head.
COLD ENGINE - Intake is .12-.17 MM or .005- to .007 inch.....Exhaust .25 to .30 MM or .010 to .012 inch....double check my metric conversion
Be sure each is checked when each cyl is at TDC. I find it easier to remove the spark plugs, so there is no compression to fight. Again....cold cyl head.
Thread
Thread Starter
Forum
Replies
Last Post
jfidelh
General Tech Help
3
Feb 26, 2013 10:03 AM
