1997 honda accord se 4cyl srs issue
#12
That code is for increased resistance in the passenger side air bag.
Here is the first step in the diagnosis:|
1 Turn off ignition switch.
2 Disconnect battery, wait three minutes
3 Disconnect front passenger air bag electrical connector
4 Connect red SRS service connector to the wiring harness electrical connector
5 Reconnect battery
6 Erase SRS codes
7 Turn off ignition switch and disconnect the wire from the MES connector
8 Short the service connector under glove box
9 Turn on ignition switch and count the srs flashes (If any)
let us know what you find.
Here is the first step in the diagnosis:|
1 Turn off ignition switch.
2 Disconnect battery, wait three minutes
3 Disconnect front passenger air bag electrical connector
4 Connect red SRS service connector to the wiring harness electrical connector
5 Reconnect battery
6 Erase SRS codes
7 Turn off ignition switch and disconnect the wire from the MES connector
8 Short the service connector under glove box
9 Turn on ignition switch and count the srs flashes (If any)
let us know what you find.
#13
ok after finding code 2-2 which is flaging resistance to high on the pass side airbag so i remove and replaced passenger side airbag cleared the codes and the light went away car works great. thanks everyone for the help
Thread
Thread Starter
Forum
Replies
Last Post