ABS Reservoir or M/C on my 94 LX
#21
Diagrams don't show but my recollection is a single bolt under the bottom of the modulator body retains the accumulator. I doubt it's accessible w/o removing modulator assy.
Removing modulator takes only about 30 mins w/ a flare tubing wrench to loosen the nuts. You will have re-bleed all brakes due to modulator leaks when removed.
good luck
Removing modulator takes only about 30 mins w/ a flare tubing wrench to loosen the nuts. You will have re-bleed all brakes due to modulator leaks when removed.
good luck
#22
I bled the brakes two more times, and the sponginess is gone! I'm going to let it set overnight and see if there are any leaks tomorrow.... *crosses fingers* I think I might just go to the Honda dealership to see if they have any extra o-rings in their inventory and see if I can snag one.
You guys are awesome.
You guys are awesome.
Thread
Thread Starter
Forum
Replies
Last Post
alexandria2010
General Tech Help
3
08-04-2010 06:58 PM
iridebmx33
General Tech Help
5
11-26-2007 06:53 PM