Manual Shift WONT Go Into Gear
#11
It is always going to build pressure the more you pump. I have always reversed bled the slaves when the normal way didn't work. Well kind of reversed. I used a turkey injector and take the needle off. Remove the slave or brake fluid cap depending on the car. put a piece of vacuum hose over the end then fill it with fluid, then open the slave valve up put the hose with the injector full of fluid on it and inject the fluid into it. This will force the bubbles out the top. You will be surprise how much quicker this is. Also forgot to add, between the fluid injections, do a normal peddle bleed to get any air that might of traveled to the inside pedal slave as well.
Last edited by kramkram; 08-13-2013 at 02:44 AM.
Thread
Thread Starter
Forum
Replies
Last Post
letsclique
General Tech Help
9
06-18-2016 04:29 PM
94LxAccordCoupe
General Tech Help
4
11-04-2011 07:38 AM